Maths – Ratio, Rate and Proportion (WASSCE) L

1. RATIO

A ratio is a way of comparing two or more quantities of the same kind.

For example, if there are 10 boys and 15 girls in a class, the ratio of boys to girls is:

10:15=2:3

Important points:

- Always express ratios in their simplest form.
- Quantities being compared must be in the same units.
- The order of a ratio is important.

Question 1: Divide GH¢600 in the ratio 2:3.

Solution:
Step 1: Add the ratio parts.

2+3=5

Step 2: Find the value of one part.

600\div5=120

Step 3: Calculate each share.

First share = 2\times120=\text{GH¢240}

Second share = 3\times120=\text{GH¢360}

Answer: GH¢240 and GH¢360.

Combining ratios

If A:B = 2:3 and B:C = 4:5, make the middle terms equal.

--A:B=8:12

--B:C=12:15

Therefore:

A:B:C=8:12:15

2. RATE

A rate compares two quantities measured in different units.

Examples include:

- Speed in kilometres per hour.
- Wages in cedis per day.
- Water flow in litres per minute.
- Fuel consumption in kilometres per litre.

Important formulas

-\text{Speed}=\frac{\text{Distance}}{\text{Time}}

-\text{Rate}=\frac{\text{Quantity}}{\text{Time}}

-\text{Unit rate}=\frac{\text{Total quantity}}{\text{Number of units}}

Question 2:  A car travels 240 km in 4 hours. Calculate its average speed.

Solution:

-\text{Speed}=\frac{240}{4}

-=60\text{ km/h}

Question 3:  A worker earns GH¢360 in 6 days. Find the amount earned in 10 days.

Solution:

Daily wage: 360\div6=\text{GH¢60}

Earnings for 10 days: 60\times10=\text{GH¢600}


3. PROPORTION

Proportion is an equality between two ratios. It is also used to describe how one quantity changes in relation to another.

There are three important types.

A. Direct proportion

Two quantities are directly proportional when an increase in one causes an increase in the other at a constant rate.

Similarly, a decrease in one causes a decrease in the other.

Examples:

- More exercise books bought means more money spent.
- More hours worked means more wages earned at a fixed hourly rate.

Formula:

--y\propto x

--y=kx

Where:

- y and x are the variables.

- kis the constant of proportionality.

Question 4:  If y = 15 when x = 3, find y when x = 8.

Solution:

Since y=kx:

-15=3k

-k=5

When x=8:

y=5\times8=\boxed{40}

 

B. Inverse proportion

Two quantities are inversely proportional when an increase in one causes a decrease in the other.

Examples:

- More workers require fewer days to complete a fixed job.
- Higher speed means less time to cover a fixed distance.

Formula:

--y\propto\frac{1}{x}

--y=\frac{k}{x}

Or:

-xy=k

Question 5:  Six workers complete a job in 12 days. How long will 8 workers take?

Solution:

-6\times12=8\times d

-72=8d

-d=\frac{72}{8}=\boxed{9\text{ days}}

 

C. Compound proportion

Compound proportion involves three or more quantities.

A quantity may depend directly on one variable and inversely on another.

Question 6:  Four machines produce 200 items in 5 hours. How many items will 6 machines produce in 8 hours?

Solution:

Production increases with both machines and time.

-\text{Required output} =200\times\frac{6}{4}\times\frac{8}{5}

-=480\text{ items}


4. SQUARE AND CUBE PROPORTION

These are also important in WASSCE questions.

Direct square proportion

--y\propto x^2

--y=kx^2

If x doubles, y becomes four times its original value.

Inverse square proportion

-y\propto\frac{1}{x^2}

If x doubles, y becomes one-quarter of its original value.

Direct cube proportion

-y\propto x^3

If x doubles, y becomes eight times its original value.


5. MAP SCALES

A scale is a ratio comparing a distance on a map or drawing with the actual distance.

For example, a scale of 1:50,000 means:

1 cm on the map represents 50,000 cm on the ground.

Question 7:  Two towns are 6 cm apart on a map with a scale of 1:100,000. Find the actual distance in kilometres.

Solution:

-6\times100,000=600,000\text{ cm}

Convert to kilometres:

-600,000\div100,000=6\text{ km}

Answer: 6 km.


6. IMPORTANT WASSCE EXAMINATION TIPS

QUESTION CLUE TYPE OF PROPORTION
More items, more cost Direct
More workers, fewer days Inverse
More speed, less time Inverse
More hours, more wages Direct
More machines, more production Direct
Square of a quantity Square proportion
Cube of a quantity Cube proportion

Essential formulas to memorise

1. Ratio sharing:

-\text{Share}=\frac{\text{Required parts}}{\text{Total parts}}\times\text{Total amount}

2. Rate:

-\text{Rate}=\frac{\text{Quantity}}{\text{Time}}

3. Direct proportion:

-y=kx

4. Inverse proportion:

-xy=k

5. Direct square proportion:

-y=kx^2

6. Inverse square proportion:

-y=\frac{k}{x^2}

Final examination advice: Before solving any proportion question, identify whether the relationship is direct or inverse. For compound proportion, determine separately how each variable affects the required quantity. This makes even lengthy WASSCE questions much easier to solve.

HINT: As a registered and paid user, you get detailed answers to the Objective Tests with our quiz engine.


<< Standard Notation

Maths – Standard Notation (WASSCE)

1. What is Standard Notation?

Standard notation (also called standard form) is a way of writing very large or very small numbers using powers of 10.

It is written as:

a \times 10^n

Where:

1 \le a < 10

n is an integer (positive or negative)


2. Why Do We Use Standard Notation?

A. To make large numbers shorter
B. To make small numbers easier to read
C. To simplify calculations in science and mathematics


3. Writing Large Numbers in Standard Notation

Steps:

1. Move the decimal point so the number is between 1 and 10
2. Count how many places you moved the decimal
3. Write that number as a power of 10


Example 1:

45,000

Move decimal 4 places left:

4.5 \times 10^4
Example 2:

3,200,000

Move decimal 6 places left:

3.2 \times 10^6

4. Writing Small Numbers in Standard Notation

Steps:

1. Move the decimal point to make the number between 1 and 10
2. Count how many places you moved
3. Use a negative power of 10

Example 1:

0.006

Move decimal 3 places right:

6 \times 10^{-3}
Example 2:
0.00045

Move decimal 4 places right:

4.5 \times 10^{-4}

5. Converting from Standard Notation to Ordinary Numbers

Example 1:
2.3 \times 10^3

Move decimal 3 places right:

2,300
Example 2:
7.5 \times 10^{-2}

Move decimal 2 places left:

0.075

6. Key Rules to Remember

Positive index → move decimal right
Negative index → move decimal left

The number in front must be between 1 and 10.


7. Worked Example

Write 0.000092 in standard notation.

Move decimal 5 places right:

9.2 \times 10^{-5}

8. Common Mistakes to Avoid

A. Writing a number less than 1  or  greater than 10 in front
B. Forgetting the negative sign for small numbers.
C. Counting decimal places incorrectly.


9. Quick Practice

Try these:

1. Write  6,700  in standard notation
2. Write  0.0048  in standard notation
3. Convert 5.6 \times 10^2 to ordinary number

HINT: As a registered and paid user, you get detailed answers to the Objective Tests with our quiz engine.


<< Number Bases

Ratio, Rate and Proportion >>

Maths – Number bases (WASSCE)

Meaning of Number Bases Place value in different bases
Converting Numbers from another base to base 10 Converting decimal numbers to another base
Converting from one non-decimal base to another Arithmetic in different bases
Addition Subtraction
Multiplication Division
Fractions in number bases Finding an unknown base
Comparing numbers in different bases Common WASSCE examination traps
Quick revision summary  

1. Meaning of number bases

A number base is the number of different digits used to represent numbers in a number system. The decimal system we use every day has base 10, while computers commonly use the binary system, which has base 2. The main number bases you should know for WASSCE are:

Number System Base Digits Used
Binary 2 0, 1
Ternary 3 0, 1, 2
Quinary 5 0, 1, 2, 3, 4
Octal 8 0–7
Decimal 10 0–9
Duodecimal 12 0–9, A, B

In base 12, A represents ten and B represents eleven. Important rule: In a base b, the allowed digits range from 0 to b-1. For example, the digit 2 cannot appear in a base-2 number.


2. Place value in different bases

In base 10, each position represents a power of 10. For example: 4,372 = 4 \times 10^3 + 3 \times 10^2 + 7 \times 10^1 + 2 \times 10^0

Similarly, in base 2, each position represents a power of 2. Consider 1011_2:

Digit Place Value Product
1 23 = 8 8
0 22 = 4 0
1 21 = 2 2
1 20 = 1 1

Therefore, 1011_2 = 8 + 0 + 2 + 1 = 11_{10}. The small number written below a numeral is called its base indicator. Thus, 1011_2 is a binary number, while 1011_{10} is a decimal number. Remember that any non-zero number raised to power zero is 1.


3. Converting numbers from another base to base 10

To convert a number to decimal, multiply each digit by its corresponding place value and add the results.

Example 3A:

Convert 2314  to base 10.

Step 1:  Write the place values. 231_4 = 2 \times 4^2 + 3 \times 4^1 + 1 \times 4^0

Step 2:  Evaluate. = 2 \times 16 + 3 \times 4 + 1 \times 1 = 32 + 12 + 1 = 4510

Example 3B:

Convert  110102  to base 10. 11010_2 = 1 \times 16 + 1 \times 8 + 0 \times 4 + 1 \times 2 + 0 \times 1

= 16 + 8 + 0 + 2 + 0

= 2610

WASSCE tip: Always begin from the right-hand side, where the place value is b^0 = 1


4. Converting decimal numbers to another base

Use the repeated division method for whole numbers. Divide the decimal number by the new base repeatedly, recording each remainder. Read the remainders from bottom to top.

Example 4A:

Convert 25_{10} to base 2.

25 ÷ 2   Quotient = 12   Remainder 1

12 ÷ 2    Quotient = 6   Remainder 0

6 ÷ 2   Quotient = 3    Remainder 0

3 ÷ 2   Quotient = 1    Remainder 1

1 ÷ 2   Quotient = 0    Remainder 1

Read the remainders upwards: 11001 Therefore, 25_{10} = 11001_2

Example 4B:

Convert 47_{10} to base 5. -

47 ÷ 5 = 9  remainder 2 -

9 ÷ 5 = 1  remainder 4 -

1 ÷ 5 = 0  remainder 1

Reading upwards gives 142_5

Check: 1 \times 25 + 4 \times 5 + 2 = 47


5. Converting from one non-decimal base to another

The safest method is to convert through base 10.

Example 5A:

Convert 132_4 to base 3.

Step 1: Convert to base 10. 132_4 = 1 \times 16 + 3 \times 4 + 2

= 16 + 12 + 2 = 30

Step 2: Convert 30_{10} to base 3. --

30 ÷ 3 = 10 remainder 0 --
10 ÷ 3 = 3 remainder 1 --
3 ÷ 3 = 1 remainder 0 --
1 ÷ 3 = 0 remainder 1

Read upwards: 1010_3

Therefore, 132_4 = 1010_3


6. Arithmetic in different bases

You can add, subtract, multiply and divide numbers in any base. The key is to remember that carrying and borrowing depend on the base.


A.  Addition

Example 6A:

Evaluate 1011_2 + 110_2 Write the numbers in columns:

 

     10112
+  01102
------
  100012

Explanation:

- Rightmost column: 1 + 0 = 1.
- Next column: 1 + 1 = 10 in binary. Write 0 and carry 1.
- Next column: 0 + 1 + 1 = 10. Write 0 and carry 1.
- Next column: 1 + 0 + 1 = 10. Write 0 and carry 1 to the next column.

Therefore, 1011_2 + 110_2 = 10001_2

Check in decimal: 11 + 6 = 17, and 10001_2 = 17_{10}


B.  Subtraction

Example 6B:

Evaluate 1000_2 - 101_2

--1000_2 = 8_{10} and 101_2 = 5_{10}

--8 − 5 = 3, and 3_{10} = 11_2

Therefore, 1000_2 - 101_2 = 11_2

When borrowing in binary, 1 borrowed from the next column represents 10_2, which is two in decimal.


C. Multiplication

Example 6C:

Evaluate 101_2 \times 11_2

    101
   × 11
-----
   101
101
-----
 1111

Therefore, 101_2 \times 11_2 = 1111_2

Check: 5 × 3 = 15, and 1111_2 = 15_{10}


D.  Division

For division questions, you may convert both numbers to decimal, divide, and convert the answer back to the required base.

For example, 1100_2 \div 11_2 : --

-1100_2 = 12_{10} --

-11_2 = 3_{10} --

-12 ÷ 3 = 4 --

-4_{10} = 100_2

Therefore, 1100_2 \div 11_2 = 100_2


7. Fractions in number bases

Fractional digits follow negative powers of the base.

For example, in base 2:

First digit after the point: 2^{-1} = 1/2

Second digit: 2^{-2} = 1/4

Third digit: 2^{-3} = 1/8

Example 7A:

Convert 10.101_2 to base 10.

-10.101_2 = 1 \times 2^1 + 0 \times 2^0 + 1 \times 2^{-1} + 0 \times 2^{-2} + 1 \times 2^{-3}

-= 2 + 0 + 0.5 + 0 + 0.125

-= 2.62510

Converting a decimal fraction to another base Multiply the fractional part repeatedly by the new base. Record the integer part at each step, reading the integer parts from top to bottom.

Example 7B:

Convert 0.625_{10} to base 2.

- 0.625 × 2 = 1.25 → integer part 1
- 0.25 × 2 = 0.5 → integer part 0
- 0.5 × 2 = 1.0 → integer part 1

Therefore, 0.625_{10} = 0.101_2

Some fractions terminate in one base but repeat indefinitely in another.


8. Finding an unknown base

WASSCE questions may ask you to determine the base of a number.

Example 8A:

If 23_b = 17_{10}, find b

Expand the number: --

--2b + 3 = 17 --
--
2b = 14 --
--
b = 7

Therefore, the base is 7. Always check that the base is greater than the largest digit in the numeral. Since the numeral contains digit 3, base 7 is valid.

Example 8B:

If 121_b = 16_{10}, find b

Expand: --

-b^2 + 2b + 1 = 16 --

-b^2 + 2b - 15 = 0

Factorise:  (b + 5)(b - 3) = 0

Thus, b = -5 or b = 3

A base must be a positive integer greater than 1, so b = 3


9. Comparing numbers in different bases

To compare numbers written in different bases, convert them to the same base, preferably base 10.

Example 9A:

Which is greater, 10110_2 or 24_8?

Convert each to decimal: --

-10110_2 = 16 + 4 + 2 = 22_{10} --

-24_8 = 2 \times 8 + 4 = 20_{10}

Since 22 is greater than 20: --

-10110_2 > 24_8


10. Common WASSCE examination traps

TRAP CORRECT APPROACH
Using an illegal digit A digit must be less than the base
Reading remainders from top to bottom during integer conversion Read them from bottom to top
Forgetting place values Start with  b0 = 1  on the right.
Carrying as if working in base 10 Carry when the column total reaches the base
Assuming every fraction terminates Some fractions repeat indefinitely
Accepting a negative base as an answer The base must be a valid positive integer greater than 1
Giving an answer without its base indicator Write the base clearly, such as 1012
Skipping verification Convert back to the original base or to decimal

11. Quick revision summary

Base to decimal: Multiply each digit by its place value and add.

Decimal integer to another base: Repeated division; read remainders upwards.

Decimal fraction to another base: Repeated multiplication; read integer parts downwards.

One base to another: Convert through decimal.

Addition and subtraction: Carry or borrow according to the base.

Unknown base: Expand using powers of the unknown base and solve.

Validity check: Every digit must be smaller than the base. The most important skills for WASSCE are conversion between bases, arithmetic in different bases, fractional conversions and finding an unknown base. Practise these until you can perform the conversions accurately without a calculator.

HINT: As a registered and paid user, you get detailed answers to the Objective Tests with our quiz engine.


<< Quadratic Equations

Standard Notation >>

Maths – Quadratic equations (WASSCE)

1. What is a Quadratic Equation?

A quadratic equation is an equation where the highest power of the variable is 2.

General form:

ax^2 + bx + c = 0

Where: a \neq 0

and

a, b, c are numbers

x is the unknown (variable).

Examples:

x^2 + 5x + 6 = 0

2x^2 - 7x + 3 = 0

x^2 - 9 = 0


Not quadratic:

x^3 + 2x = 0 (power is 3 ❌)

Not quadratic:  5x - 4 = 0 (power is 1 ❌)


2. Ways to Solve Quadratic Equations

For beginners, we learn 3 main methods:

1. Factorisation (easiest)
2. Square root method
3. Quadratic formula


METHOD 1: FACTORISATION

Steps:

1. Write the equation in the form

ax^2 + bx + c = 0

2. Factorise the quadratic expression
3. Set each bracket equal to zero
4. Solve for x


Example 1:

x^2 + 5x + 6 = 0

Step 1: Factorise

Find two numbers that:

  • multiply to +6
  • add to +5

Those numbers are 2 and 3

(x + 2)(x + 3) = 0

Step 2: Set each bracket to zero

x + 2 = 0 \quad \text{or} \quad x + 3 = 0

Step 3: Solve for x to get:

x = -2 \quad \text{or} \quad x = -3

✅ Answer: x = -2, -3


Example 2:

x^2 - 7x + 10 = 0

Numbers that multiply to +10 and add to –7 are –5 and –2

(x - 5)(x - 2) = 0

Set each bracket equal to zero:

x - 5 = 0

Add 5 to both sides to get x = 5

The second bracket:

x - 2 = 0

Add 2 to both sides to get x = 2

So x = 5 \quad \text{or} \quad x = 2

HINT: As a registered and paid user, you get detailed answers to the Objective Tests with our quiz engine.


<< Rational Numbers

Number Bases >>

Maths – Rational numbers (WASSCE)

What are Rational Numbers?

A rational number is any number that can be written in the form:

\frac{p}{q} \quad \text{where } p, q \in \mathbb{Z} \text{ and } q \neq 0

p = numerator
q = denominator

Examples

(a) \frac{3}{4}
(b) -\frac{7}{5}
(c) 2 = \frac{2}{1}
(d) 0 = \frac{0}{1}


Not Rational

(i) \sqrt{2}
(ii) \pi
(iii) 0.333\ldots (recurring without pattern)


Types of Rational Numbers

(a) Integers

All integers are rational numbers:
-3 = \frac{-3}{1}, \quad 5 = \frac{5}{1}

(b) Fractions

Proper fraction:\frac{3}{5}
Improper fraction: \frac{7}{4}
Mixed number: 1\frac{3}{4}

(c) Terminating Decimals

Decimals that end:
0.25 = \frac{1}{4}, \quad 0.6 = \frac{3}{5}

(d) Recurring (Repeating) Decimals

Decimals with a repeating pattern:
0.\overline{3} = \frac{1}{3}, \quad 0.\overline{12} = \frac{4}{33}


CONVERTING BETWEEN FORMS

(a) Converting Fraction to Decimal

Divide numerator by denominator.

Example

\frac{3}{4} = 0.75


(b) Converting Terminating Decimal to Fraction

Write over a power of 10 and simplify.

Example

0.2 = \frac{2}{10} = \frac{1}{5}


(c) Converting Recurring Decimal to Fraction

Let the number equal (x).

Example

x = 0.\overline{6}

10x = 6.\overline{6}

10x - x = 6

9x = 6 \Rightarrow x = \frac{2}{3}


MAIN MENU

Quadratic Equations >>